Inland 45
and Inland 45Z
Inland 45 and 45Z synthetic hydrocarbon fluids permit strain-free cold
starts as a result of their low pour point and high viscosity index (i.e.
viscosity is lower than that of typical pump fluids at low temperatures).
In addition, because these fluids maintain their viscosity at high temperatures,
it provides a good seal under full-load conditions. Among other properties
offered by Inland 45's unique molecular structure are chemical resistance
and high temperature stability superior to those of other high performance
oils, such as white oils; and low vapor pressure.
Nontoxic, non corrosive, Inland 45 is compatible with Buna-N, neoprene
and Viton elastomers; and miscible with petroleum based oils, Freon, aromatic
solvents, and flushing fluids.
| Specifications |
INLAND 45
|
INLAND 45Z
|
| Vapor Pressure @ 25º C: |
<1x10-7 torr
|
<1x10-7 torr
|
| Boiling Point @ .01 torr: |
133ºC(271ºF)
|
137ºC(279ºF)
|
| Viscosity @ 40ºC: |
53 cSt(247 SUS)
|
67 cSt(318 SUS)
|
| Viscosity @ 100ºC: |
7.0 cSt(49 SUS)
|
9.2 cSt(56 SUS)
|
| Pour Point: |
-59ºC(-74ºF)
|
-55ºC(-67ºF)
|
| Flash Point: |
264ºC(507ºF)
|
285ºC(545ºF)
|
| Fire Point: |
288ºC(550ºF)
|
305ºC(581ºF)
|
| Density: |
0.83 g/mL
|
0.83 g/mL
|
| To compare products, click |
here |
to see the entire specification chart of mechanical pump fluids
offered by Inland. |