INLAND FF-45

 

The FF-45 solvent-free flushing fluid is specifically designed for use with pumps operated with synthetic hydrocarbon fluids.  Periodic use of FF-45 to remove pump contaminants and particulates will prolong pump life to avoid costly rebuilding

PERFLUOROSOLV^TM PFS-2 Solvent

PERFLUOROSOLV^TM PFS-2 Solvent is a low molecular weight perfluoropolyether which can be used in many industrial applications. PFS-2 performs well in many electronic and semiconductor cleaning applications, such as:

· Pump and compressor cleaning

· Vapor blanketing

· Degreasing

· Flash Point reduction

· Dewatering

· Trace residue elimination

 

PFS-2 solvent has been formulated to be compatible and completely miscible with perfluoropolyether (PFPE) and perfluorocarbon fluids at all temperatures and chlorotrifluoroethylene (CTFE) oils and greases above 45ºC. All of these materials are used extensively in semiconductor and electronic manufacturing. PFS-2 solvent can also act as a diluent in the application of more viscous PFPE fluids or greases.

PFS-2 solvent is non-flammable and well suited for cleaning operations where:

·   solvents are applied to hot components

·   solvents are heated prior to application

·   solvents are pressure sprayed on components

·   solvents are used in forced air stream cleaning

·   extended immersion baths are required

 

PFS-2 has a lower boiling point and hence a higher evaporation rate compared to PFS-1. Parts cleaned with PFS-2 will dry faster that those cleaned with PFS-1. When using PFS-2, especially in open baths, it may be necessary to take precautions to avoid excessive losses from the bath.

Typical properties of PFS-2 solvent versus PFS-1 are listed below.

Vacuum Performance Oils and Greases

Inland Vacuum Industries, Inc.

Product Detail

Preventive maintenance of mechanical vacuum pumps by utilizing regular, schedule oil changes pays off in several ways;

· expensive down time is reduced

· process running time is optimized

· cost of expensive repairs is greatly reduced

· system performance is continuous and predictable

 

During the operation of the vacuum pump the oil becomes the sump for any solids and condensables carried over from the process.  As the carry-over builds up in the pump, oil performance deteriorates, affecting over pump capacity.  Operating vacuum levels and concurrent mechanical wear is most directly affected by this.

Inland Vacuum has expanded its line of preventive maintenance products to include   a number of new flushing fluids.  This section also includes information on Galden PFS-2 Solvent and our Acidity Test kits.  Through our products, services, and technical support, Inland aims to help you, our valued customer, in establishing good preventive maintenance practices enabling you to greatly lengthen your pump's life and optimize performance levels.

Preventative maintenance

Acidity Test Kit

 

The acidity test kit is an easy to use kit designed to detect acidic buildup in hydrocarbon or non-hydrocarbon inert vacuum pump fluids.  Acid Buildup, common in today's corrosive semiconductor environments, can attack a vacuum pump's internal components, leading to pump failure and unnecessary downtime. 

 

Use of the acidity test kit helps to determine fluid or filter element change rates for optimum system performance.

· One Kit for Hydrocarbon and Non-Hydrocarbon Fluids.

· Detects Acidity Build-up in Hydrocarbon/Non-Hydrocarbon Fluids

· Easy to use test

· Indicates Fluid or Filter Element Change Rates

 

Each Kit can perform 7 Individual Test.

INLAND FF-10 and INLAND FF-TW

 

FF-10 and FF-TW are solvent free hydrocarbon flushing fluids designed to be used as part of a preventive maintenance program.  Periodic use of FF-10 will enable the user to remove contaminants and particulates from within all areas of the pump without the worry of contaminating the pump with an expensive solvent.  FF-TW is designed for pumps that have been filled with TW and HVTW type vacuum pump fluids.

To contact us:

Phone: 585-293-3330

Fax: 585-293-3093

E-mail: info@InlandVacuum.com

< Return to Product List

Home | About Us | Contact Us | Product List | Tradeshows | Terms and Conditions | Online Order | Request MSDS | Request Quote

Home

GeminYe PFPE Oil

Mechanical Pump Oil

Apiezon Products

Diffusion Pump Oil

Galden Fluid

Dielectric Insulating Fluid

NSF Lubricants

Greases and Waxes

TorrLube

Maintenance Products