Inert High Vacuum Grease is a combination of an extremely low vapor
pressure perfluoroalkylpolyester oil and a fluorocarbon resin thickener.
These homogenous, white, buttery greases are designed for use in high vacuum
environments operative where exposure to corrosive gases is probable.
Inert High Vacuum Grease is not degraded or dissolved by most solvents,
acids, bases, or other highly reactive chemicals, and can be cleaned from
surfaces by dissolving the oil portion with solvent.
Y VAC 3
Y VAC 3 is particularly suitable for use as a lubricant of mechanical
parts operating at high vacuum and in contact with aggressive chemicals
or oxygen. Y VAC 3 is used in lubricating "for life" applications; its
lubricating properties make it suitable for parts for long periods of time,
and at very high operating temperatures (from -20ºC to 200ºC)
and is used in the manufacturing, aeronautical, and electromechanical industries.
| Specifications | |
| Penetration,(worked,25ºC), mm/10: |
|
| Temperature range, ºC: |
|
| Oil Separation, (30 hrs, 204ºC): |
|
| Density, (25ºC, g/mL): |
|
OT 20
OT 20 is suitable for lubricating mechanical parts subjected to low
loads, used at low operating temperatures, and high thermal ranges (from
-70ºC to 100ºC). OT 20 is particularly suitable for lubricating
roller bearings of conveyor belts or suspended conveyor belts used in cold
storage rooms.
| Specifications | |
| Penetration,(worked,25ºC), mm/10: |
|
| Temperature range, ºC: |
|
| Oil Separation, (30 hrs, 204ºC): |
|
| Density, (25ºC, g/mL): |
|
UT 18
UT 18 is suitable for lubricating mechanical parts subjected to medium
loads, where standard mineral and synthetic lubricants are not resistant
to temperature and air degradation. UT 18 is also used in lubricating
special optical and micromechanical equipment.
| Specifications | |
| Penetration,(worked,25ºC), mm/10: |
|
| Temperature range, ºC: |
|
| Oil Separation, (30 hrs, 204ºC): |
|
| Density, (25ºC, g/mL): |
|
RT 15
RT 15 is suitable for lubricating mechanical parts requiring boundary
(extreme pressure) lubricating properties. Shell four ball EP test
show that Fomblin RT 15's welding point is 800 kg. Its operation temperature
range is from -20ºC to 200ºC. Its properties make
it suitable in lubrication "for life" applications.
| Specifications | |
| Penetration,(worked,25ºC), mm/10: |
|
| Temperature range, ºC: |
|
| Oil Separation, (30 hrs, 204ºC): |
|
| Density, (25ºC, g/mL): |
|
|
|
|
|
|